OMTech 100W 24x40 in CO2 Laser Engraver Cutter Cutting Machine Ruida. Bring your ideas to life with OMTech's laser engraver MF series!
This laser cutting and engraving machine includes dual work platforms: a honeycomb bed for smaller objects and a firmer aluminum knife blade bed for larger, harder substrates like acrylic blocks. Custom designed for our machines. Compatible with most third-party graphic software, this laser cutter allows you to turn your fresh ideas into reality on a large scale. Simply upload your designs using the included software or via the Ethernet or USB ports, choose your substrate, and the laser will engrave and cut your design with pinpoint precision.
In addition to its quality, durability, and the usual long service life, your new laser cutter is also highly practical, with a built-in air assist blowing dust and debris away from the laser head and a digital power supply providing stable high-voltage current and real-time information on your engraver's status. Safe as can be, this laser engraver and cutter can lock its control panel via password and the included keys and automatically cuts off the laser beam if the protective cover is opened. When your work is done, just unlock the casters and wheel it anywhere you want for easy storage and quick transport.
Check out our many Accessories and Parts to go along with your laser machine! The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks.
1 x Laser Engraver Machine. 1 x USB Type-A to Type-A Cable. 1 x Ethernet to Ethernet Cable.1 x Stainless Steel Clamp. Engraving Depth: 0.25 in. Workbed Height Range: 9 in. Front/Back Pass Size: 25×1.46 in. Engraving Speed: 23.6 ips (600 mm/s). Cutting Speed: 15.7 ips (400 mm/s). Included Software: RDWorks 8, CorelLaser. Graphic Operating Modes: Optimized Raster, Vector, and Combined. Transfer Interface: Flash Drive, USB Cord, Ethernet Cord. Machine Dimensions: 40.2×25.6×24.8 in. Laser Wavelength: 10.6 µm. Laser Tube Diameter: 2 in. Laser Tube Length: 34.6 in.
If you must modify your. Special circumstances will be stated clearly in the listing. Please check everything carefully after you receive the parcel, as any damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Parts must be resaleable and in the original packaging.
We cannot take back used products. We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria. Return request need to be within 30 days of receipt.
Bring your ideas to life with OMTech's versatile desktop laser engravers! This 40W CO2 laser engraver continues to uphold our high standards with its digital control panel; bundled LaserDRW software; long-lasting laser tube; digital laser power supply; large 8 by 12 inch working area; red dot guidance; and the included ammeter to monitor the amount of current being used by the laser tube. Start marking, engraving, and etching your designs onto and into wood, paper and cardboard, plastics and acrylic, leather, fabric, and other non metallic materials with this 40W desktop engraver.Whether creating personal gifts, beautiful art, or a new home business, this CO2 laser system works with your control computer via the included engraving software to engrave and mark your design with pinpoint precision at depths up to 1/8 (3 mm). In addition to its quality, durability, and long service life, your new laser engraving machine is also highly practical and safe, automatically cutting power to the laser beam if the protective cover is opened. Accessible, versatile, and portable, you can do no better as you start your laser engraving journey than this powerful little desktop K40 from OMTech! 40W CO2 laser tube with an estimated lifetime of up to 2,000 operation hours depending on power setting usage and water cooling performance. PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows. Low Power 10-40% = 1,500-2,000 Hours. Moderate Power 40-70% = 1,000-1,200 Hours. High Power 70-100% = 400-600 Hour. Acrylic Wood Leather Plastics Fabrics Glass Rubber Cork Brick Granite Marble Tile River Rock Bone Melamine Phenolic Aluminum Stainless Steel Titanium. CO2 lasers only mark bare metals when anodized or treated.
Some PVC-based acrylics can create toxic fumes when lasered. Our digital control panel's LCD display offers clear monitoring of the tube's temperature and easy adjustment during use.
The helpful E-stop button brings everything to an immediate stop when needed. Equipped with a 40W laser tube with a lifespan of up to 2000 hours, this laser engraver provides sufficient energy for engraving and marking non-metallic substrates up to?? Our 40W laser power supply delivers excellent performance with high efficiency and fast response times. Increase the service life and get the most out of your laser tube with our safe, stable, and capable power supply. Exhaust pipe works perfectly with our built-in fan, directing hazardous debris away from the engraving surface and into your ventilation system, enhancing your work quality and safety.
(200×300 mm) workbed provides about 0.7 square foot of room to fit all your projects, whether personalized gifts for friends and family or custom orders for new clients. Our engraver comes with built-in support for standard rotary axes (not included) with 4-pin connectors.Enjoy plug and play engraving of rings, bracelets, cups, tubes, and other cylindrical surfaces. The transparent acrylic window's sepia filter allows you to observe your engraver in action, as the tint blocks the laser beam and protects your eyes. The laser automatically stops engraving, cutting, or marking when the workbed's cover is opened for your safety.
Close the cover and press Start to resume your work. Our ammeter shows the amount of current being used by the laser tube in real time to ensure your designs are processed perfectly and help you identify and troubleshoot any problems during operation.
1 x 40W CO2 Laser Engraver. 1 x Maintenance Tool Set.
1 x USB Flash Drive (with Software). 1 x Tube of Silicone Insulation. Engraving Depth: 0.12 in.
Engraving Speed: 13.8 ips (350 mm/s). Supported Operating Systems: Windows 7, 8, 10, & XP. Mirror Diameters: 0.8 in. If the weight of your order exceeds 150 lbs.OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California. Our affordable but quality lasers and US-based support quickly grew us into the largest online brand for precision engraving. Alongside our skilled & helpful staff, OMTech users have built up a supportive online family in our forums and social media, sharing inspiration and sharpening their DIY skills together.
We love keeping the OMTech family on the cutting edge of laser crafting because we know our growth is inseparable from your success. All emails will be responded to within 12-24 hours. One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California.This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "seriouswholesaler" and is located in this country: US. This item can be shipped to United States.