Custom designed for our machines. Compatible with most third-party graphic software, this laser cutter allows you to turn your fresh ideas into reality on a large scale. Simply upload your designs using the included software or via the Ethernet or USB ports, choose your substrate, and the laser will engrave and cut your design with pinpoint precision.
In addition to its quality, durability, and the usual long service life, your new laser cutter is also highly practical, with a built-in air assist blowing dust and debris away from the laser head and a digital power supply providing stable high-voltage current and real-time information on your engraver's status. Safe as can be, this laser engraver and cutter can lock its control panel via password and the included keys and automatically cuts off the laser beam if the protective cover is opened.When your work is done, just unlock the casters and wheel it anywhere you want for easy storage and quick transport. Check out our many Accessories and Parts to go along with your laser machine!
The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks. 1 x Laser Engraver Machine.
1 x USB Type-A to Type-A Cable. 1 x Ethernet to Ethernet Cable. 1 x Stainless Steel Clamp. Engraving Depth: 0.25 in.
Workbed Height Range: 9 in. Front/Back Pass Size: 25×1.46 in. Engraving Speed: 23.6 ips (600 mm/s).
Cutting Speed: 15.7 ips (400 mm/s). Included Software: RDWorks 8, CorelLaser.
Graphic Operating Modes: Optimized Raster, Vector, and Combined. Transfer Interface: Flash Drive, USB Cord, Ethernet Cord.
Machine Dimensions: 40.2×25.6×24.8 in. Laser Wavelength: 10.6 µm.Laser Tube Diameter: 2 in. Laser Tube Length: 34.6 in. If you must modify your. Special circumstances will be stated clearly in the listing. Please check everything carefully after you receive the parcel, as any damages except DOA (Dead-On-Arrival) are not covered if it's the fault of the consumer. Our 30-day Satisfaction Guarantee assures our customers that they will receive all orders promptly and exactly as described. Parts must be resaleable and in the original packaging. We cannot take back used products.
We cannot take back installed or tired products. We do reserve the right to refuse and return any parts we find have been installed, are used or do not meet the above criteria.
Return request need to be within 30 days of receipt. Bring your ideas to life with OMTech's laser engraver AF series! This 130W CO2 laser engraver continues to uphold our previous high standards with its software suite (RDWorks 8 & CorelLaser), Ruida control panel, LCD display, large 35x50 inch working area, and pass-through doors that allow even larger pieces to be worked on. This laser cutting and engraving machine provides dual work platforms: a honeycomb bed for smaller objects and a firmer aluminum knife blade bed for larger, harder substrates like acrylic blocks. Its autofocusing system works with the bed's motorized lifting platform to get you marking, engraving, and cutting your designs onto and into wood, paper and cardboard, plastics and acrylic, leather, fabric, and other nonmetallic materials more quickly and efficiently than ever before.Compatible with most third-party graphic software, this laser etching machine lets you upload your designs using the included software or via the Ethernet or USB ports. Choose your substrate, adjust your parameters, and the laser will engrave and cut your design with pinpoint precision.
Adjust the workbed up or down from the control panel and the provided sensors will let you automatically adjust the laser beam to compensate. To keep your creation of intricate patterns and stunning images easy, Safe as can be, this laser engraver and cutter can lock its control panel via password and the included keys; automatically cuts off the laser beam if the protective cover is opened; and provides an installed air assist to blow debris clear of the laser as it is created.
With OMTech's precision engineering, quality materials & assembly, and good name, you can do no better for all your marking, engraving, and cutting projects at home or in your workshop. Laser Tube Lifetime: 130W CO2 laser tubes with estimated lifetimes of up to 8,000 operation hours depending on power setting usage and water cooling performance PLEASE NOTE: Frequent use of high laser power settings will shorten the laser tube lifetime as follows: Low Power 10-40% = 7,000-8,000 Hours Moderate Power 40-70% = 5,000-6,500 Hours High Power 70-100% = 3,000-4,000 Hours. Compatible Materials: Laser Cutting: Acrylic Wood Leather Plastics Fabrics MDF Cardboard Paper Corian Foam Fiberglass Rubber Marking/Engraving: Acrylic Wood Leather Plastics Fabrics Glass Rubber Cork Brick Granite Marble Tile River Rock Bone Melamine Phenolic Aluminum Stainless Steel Titanium Cannot cut hardwoods like mahogany CO2 lasers only mark bare metals when anodized or treated. Some PVC-based acrylics can create toxic fumes when lasered. Certifications: FDA Compliant CE Certification ISO9001 Quality Certification.The intuitive control panel with a digital display allows complete control of the laser head, pausing and stopping projects, adjusting laser power and speed settings, file viewing, and project framing via Windows-compatible RDWorks v8. (1300×65 mm) front & back and 35?? (900×20 mm) on either side-allows you to work pieces much larger than the bed size by sliding them through as you go. The laser head is equipped with an automatic focus adjustment that you can use directly from the control panel, eliminating tedious manual adjustment. Our 1650 mm EFR F6 CO2 laser tube provides 130W of power for up to 8000 hours or lasts twice as long when consistently used at lower settings. This powerful laser engraver comes with an industrial-strength water chiller to keep the laser tube nice and cool no matter your project. The transparent acrylic window's sepia filter allows you to observe your engraver in action, as the tint blocks the laser beam and protects your eyes.
The laser automatically stops engraving, cutting, or marking when the workbed's cover is opened for your safety. Close the cover and press Start to resume your work. The conveniently located emergency stop button immediately cuts the laser power and stops all moving parts in case any problems occu.
1 x 130W Laser Engraver 2 x Water Hoses 1 x Water Pump 1 x Ground Wire 1 x USB Cable 1 x USB Flash Drive with Software 1 x Ethernet Cord. 1 x CW 5200 Water Chiller 1 x Tube of Silicone Insulation 1 x Exhaust Pipe 1 x Hose Clamp 1 x Key 1 x Ceramic Resistor 1 x Maintenance Toolkit. Model: SH-G1390 Input Power: 110V/60Hz AC Processing Area: 35×50 in. Engraving Depth: 0.5 in. (12 mm) Workbed Adjustment: Electric Workbed Height Range: 4 in.
Engraving Speed: 23.6 ips (600 mm/s) Max. Cutting Speed: 15.7 ips (400 mm/s) Front/Back Pass Size: 51.1×2.5 in. (1300×65 mm) Side/Side Pass Size: 35.4×0.7 in.(900×20 mm) Transfer Interface: Flash Drive, USB Cord, Ethernet Cord Graphic Operating Modes: Optimized Raster, Vector, and Combined Net Weight: 419 lb. Focal Lens Diameter: 0.8 in. (20 mm) Focal Length: 2.5 in. (63.5 mm) Mirror Diameters: 1 in. Model: CW-5200 Material: Steel, ABS, Copper Color: Blue, Grey Input Power: 110V/60Hz Current: 4.6-6.5A Compressor Power: 0.9 hp (0.68kW) Refrigerating Capacity: 5186 BTU/hr.
(1.52 kW) Water Capacity: 1.6 gal. Flow: 2.6 gpm 10L/min. Product Dimensions: 22x11.4x17 in. (56x29x43 cm) Inlet/Outlet Port Diameter: 2/5 in. (1 cm) Weight: 57.3 lb.If the weight of your order exceeds 150 lbs. OMTech is a collaboration of 30-yr industry vets and promising new techs in Anaheim, California. Our affordable but quality lasers and US-based support quickly grew us into the largest online brand for precision engraving. Alongside our skilled & helpful staff, OMTech users have built up a supportive online family in our forums and social media, sharing inspiration and sharpening their DIY skills together. We love keeping the OMTech family on the cutting edge of laser crafting because we know our growth is inseparable from your success.
All emails will be responded to within 12-24 hours. One 45-minute Virtual Tech Support appointment with OMTech Specialists in Anaheim, California. This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "seriouswholesaler" and is located in this country: US.This item can be shipped to United States.