Monport 60W 16x24 Cutting Engraving Marking Machine CO2 Laser Engraver Cutter

  

Monport 60W 16"x24" Cutting Engraving Marking Machine CO2 Laser Engraver Cutter. Monport Upgraded 60W CO2 Laser Engraver Cutter with 16 x 24 Inch Work Table. With Ruida Controller Air Assist RDWorks Wheels, Laser Marking Etching Machine for Wood Acrylic Paper Fabric More. CE & FDA US STOCK. Machine Dimension: 44.1'' x 29.5'' x 25'' (112cm x 75cm x 64cm).

Package Dimension: 48.8" x 33" x 32.6 (124cm x 84 cm x 83 cm). 16" x 24" (40 cm x 60 cm).

1.5'' x 28''(4cm x 73 cm). Min Engraving Depth: 0.01mm. 9" Standard Z-depth and 10" Max Z-depth. Net Weight: 209 lbs (95 kg).

Package Weight: 253.5 lbs (115 kg). This viewing window is made from special fire-resistant polyester with iron frames. The melting point of this polyester ranges from 432° to 488° and the ignition temperature of it is over 1000°, which can dramatically decrease the possibility of fire accidents caused by the heat of laser burning the materials. Equipped with X and Y stepper motors, this rail features efficient power transmission with high precision. The enclosed rail is designed to avoid smoke and debris and prolong the service time of rail units.

Whether your chosen software is LightBurn, RDworks, AutoCAD, or CorelDRAW, this Ruida digital controller can support the given platform. The Ruida Controller with a digital display can control the laser head, start or stop projects, adjust laser power and speed settings and so on. The Engraving Speed is up to 800 mm/s. The Cutting Speed is up to 400 mm/s.

The Resolution is up to 4500 dpi. 2.0 Focal distance provides high resolution and etching of tiny fonts.

A built-in air assist system guides a pressurized air stream through the laser head nozzle to displace debris, heat, and combustible gases from the engraving surface and laser beam path, keeping engravings more precise. 3-ways to Connect with PC End. Two USB ports provide options including flash drive connectivity and a USB-to-USB PC connection. In addition, one ethernet port is also available for connection. The red dot shows the laser head position, marks the working path and frames the project sizes, assisting you with more convenience and guidance.

The safety shutdown sensor helps stopping the machine even if the window cover is on. Once closed, press the "Enter" button to continue operation. Works on Windows XP, 2000, Vista, WIN 7, 8, 10 & 11, both 64 & 32 bit. MacOS (Version 10.11 and higher) ONLY with LightBurn software. Compatible with Lightburn, RDWorks, Coreldraw, Auto-CAD.

Supported image formats: BMP, HPGL, GIF, JPG, JPEG, DXF, DST, AI and others. Custom CO2 glass laser tube capable of continuous operation at 10,640 nm. Rated at over 60 watt. 18mm Focal lens diameter & 2 Focal distance. Recommended engraving speed: 100 - 500mm/s. Recommended cutting speed: 1 - 30mm/s (actual speed depends on the thickness of the material).

The light belt under the lid gives point illumination for precise. Linear System - Custom extruded aluminum linear rails. Motion - Equipped with stepper X, Y axis, plus mechanical limit switches. Cooling - easy-to-setup water pump and hoses. Air Assist - Internal air assist with no external compress or required.

Ventilation - On-board exhaust fan, as well as an exhaust hose so you can vent the fumes to the outdoors. Standard 110V, AC power connection.

4-pinport connection for rotary axis devices. Temperature-- Recommended Operating Temperature: 60 -104 °F (16 °C-40 °C)?

Attention: the CO2 water temperature must be maintained at 60-70 °F (16-21°C). Can safely engrave or cut any laser-compatible material. Wood, glass, acrylic, fabric, leather, paper, cardboard, rubber. If necessary, we can test it for you. Product Length: 39.37 (1000mm). Product Weight: 24.2 lbs (11 kg). The 60W borosilicate glass CO2 laser tube, with an expected service life of 2,000 operation hours depending on the power setting. Attention: Running the machine at a high power frequently will surely shorten the service life of the laser tube as follows.

Laser tube lifespan 1,700-2,000 Hours. Laser tube lifespan 1,300-1,500 Hours.

Not Recommended but Accessible Power 70-100%? Laser tube lifespan 800-1,000 Hours. FDA Approval & CE Certified.

Ethernet to Ethernet Cable 1. USB Type-A to Type-A Cable 1. Venting Exhaust Duct 4 ft. USB Drive with Software (RDworks) 1. Comparison of Monport 60W Co2 Laser Engraver.

Windows & Mac OS & Linux. 49.2'' x 36" x 36.2".

44.1"x 29.5" x 25. Your kind consideration is highly appreciated.

Simply return the item to us in 30 days in an unused condition. But remember to keep the item clean, intact with all labels, or we won't accept your request. As an emerging leader in manufacturing and exporting, we specialize in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for over 10 years.

It is our mission to provide innovative products and competitive prices to satisfy you. Please submit all enquires via the "Ask a Question" tab, located at the bottom of this page.