The laser comes with a flash drive containing a PDF copy of the operating manual that explains how to operate this laser using a DB25 parallel interface or using RS-232 interface. The NuQT fiber laser from Nufern is a pulsed marker delivering 1 mJ pulse energy with a fast turn-on time and higher peak power (up to 10 kW) over a wide range of repetition rates (variable from 20-200 kHz), which maximizes production throughput and marking capability. With its single-mode beam quality, the NuQ laser can produce ultra-fine, crisp marks every time.
The system design ensures no bleed-through power when the gate signal is off, to prevent the appearance of ghost lines between marks, even on very sensitive materials. Complete with industry standard interfaces, the system is pumped by single-emitter diode lasers, which offer long lifetime and maintenance free operation. 100.0 W per output. Leakage Power in Off State. 7.50 ± 1.00 mm.Fiber to Free Space Isolator. 1064.0 ± 2.0 nm. Output Cable Minimum Bend Radius. 215 x 136 x 284 mm. 0 to 85 % RH non-condensing.
This item is in the category "Business & Industrial\Printing & Graphic Arts\Screen & Specialty Printing\Engraving". The seller is "tassilia" and is located in this country: US. This item can be shipped to United States.